Description
Inputs
Wireless interfaces:
- Wireless M-BUS S1 and C1/T1 (868 MHz)
- Compatible with EN 13757-4
- Compatible with OMS 4 counters
- Sensus RF Bubble Up
- Müller radio (ME protocol, walk-by)
- Storage for up to 65,000 meters
Wired interfaces:
- IP68 aviation-style circular connector (standard)
- Alternative: Cable bushing
- Modbus master (RS-485)
- Modbus RTU
- Modbus ASCII
- 2400 - 115200 baud
- Automatic address scan
- Max. Number of Modbus registers: 1,800
- Max. Quantity Modbus requests: 15x
- 12V (1W) supply voltage for sensor supply
- Can be combined with wireless M-BUS readout
- 4-pin plug + 22 cm cable (12V, GND, A, B)
- 1-Wire: Up to 20 temperature sensors (type: DS18B20)
- 3-pin connector + 22 cm cable (3V, GND, DQ)
Outputs
- Mobile radio (NB-IoT, LTE-M)
- CBOR / JSON via MQTT (standard)
- CBOR via CoAP (Lobaro Platform)
- DTLS / TLS encryption
- LwM2M (planned)
- LoRaWAN 1.0.2 EU868
- DECT NR+ (1.9 GHz band pre-installation)
Power supply variants
- 38 Ah lithium battery (standard)
- Battery life 15+ years possible (submetering use case)
- 9V to 36V DC (230V plug-in power supply)
- 230V AC (WAGO terminal)
- Solar cell (integrated in housing cover) + backup battery (3.8 Ah)
Housing
- Size: 151 x 125 x 62 mm
- IP67 (standard)
- Optional: IP68 (special seal, 1.2 m, 14 days)
- UL 94 V0 classification
- Highly flame-retardant plastic
- F1 listing according to UL 746C
- Suitable for permanent outdoor use
- Impact resistance IK 07 / IEC 62262
- Mounting for rear wall bracket or pole mount
Further features
- USB and remote configuration / firmware updates
- Flexible planning of remote meter readings via CRON parameters
- Installation and Live Mode
- Configurable white and black lists for counters
- Operation as wireless M-BUS repeater (pre-installation)
Order information

All variants of the product are also available on request with M12, M16 or M20 screw connection instead of the plug system.
Standard: Battery supply (38 Ah)
- Article: 1200526
- Power supply: 2x D-cell 3.6V, 38Ah
Variant: External power supply (12V)
- Article: 1200526-2
- Power supply: 12V / 2A plug-in power supply (included)
- 12V connection on the device via DC hollow socket, IP40
Variant: External power supply (230V)
- Article: 1200526-1
- Power supply: 230 VAC WAGO terminal block
- Connection in the device via PG16 cable gland
Variant: Solar power supply
- Article: 1200526-3
- Power supply: 2W solar cell incl. backup battery
- Ideal for frequent readouts and outdoor installation
Antenna configuration
- LTE internal, wM-BUS / LoRa internal (standard)
- LTE external, wM-BUS / LoRa internal (1x SMA): 1200526-X1
- LTE internal, wM-BUS / LoRa external (1 x SMA): 1200526-X2
- LTE external, wM-BUS / LoRa external (2 x SMA): 1200526-X3
- LTE external, wM-BUS / LoRa external (1x SMA); 1200526-X4

















